|
quality
assurance guaranteed
Where
strength and functionality is the key.
The
fittings are simple, neat and have been designed for use on 15mm
or 18mm core high pressure decorative laminated panels and 12mm
core solid grade laminated panels, as well as economy range 18mm
melamine faced panels.
All
cubicle fixtures and fittings supplied by Design & Display
are solid, robust, visually strong and simple to install. They
are all fully non-corrosive and are suitable for application in
areas where contact with water or heavy moisture may be required,
such as showers or swimming pools.
|
|
toilet
cubicle system fixtures |
|
'L'
Bracket
Design
& Display offer traditional and innovatively designed angle
brackets ('L' shaped) suitable to fit all cubicle requirements.
The
'L' shaped bracket is suitable for use on 17-19mm and 19-21mm
panels and matches with standard indicator bolts and hinges.
|
|
'U'
Bracket
Design
& Display offer traditional and innovatively designed channel
brackets ('U' shaped) suitable to fit all cubicle requirements.
The
'U' shaped bracket is suitable for use on 17-19mm and 19-21mm
panels and matches with standard indicator bolts and hinges.
|
|
leg
The
leg is bolted through the partition or fascia for strength and
they are fully adjustable to accommodate falling floors, commonly
found in wet areas. To make fitting easier the leg can be fixed
to the floors once the cubicle has been positioned correctly.
The leg matches with standard indicator bolts, partition supports
and hinges.
|
|
headrail
The
headrail is designed to stabilise a cubicle system by increasing
the system strength and durability. A headrail is ideally suited
for WC's, changing rooms and shower cubicles and also further
compliments the unique look of Design & Display's toilet cubicle
systems. The headrail matches with standard indicator bolts, partition
supports and hinges.
|
|
indicator
bolt
Each
indicator bolt consists of a slide bolt assembly, faceplate and
keep, plus all the fixings required for fitting. This 'anti-vandal'
indicator bolt comes as standard with 'hidden' fixings. It is
suitable for inward opening, outward opening or disabled cubicles.
In the event of an emergency the cubicle door can be opened with
an easy to use coin release mechanism. This indicator bolt matches
with standard partition supports and hinges.
|
|
hinge
The
'D' shaped hinge fixes through the fascia and clamps the edge
of the door for maximum strength and prevents the door from bursting
under pressure. The hinge incorporates easily adjustable cams,
allowing the door to be set to fall open, closed or ajar. The
hinge matches with standard indicator bolts and partition supports.
|
|
coat
hook
To
finish off the cubicle system Design & Display supply a robust
coat hook. This is easily fixed to the wall, partition or on the
inside of the cubicle door. The coat hook matches with standard
indicator bolts, partition supports and hinges.
|
|
toilet
roll holder
To
finish off the cubicle system Design & Display supply a stylish
and practical toilet roll holder. These are easily fixed to a
wall, the partition or on the inside of the cubicle door. The
toilet roll holder matches with standard indicator bolts, partition
supports and hinges.
|
|